HAMADA U.S.A

600DW Series

The 600DW series are A3 small offset presses. Equipped with a pin bar plate clamp system, it is capable of registration in simple multi colored printing. This series is suitable for the printing of small postcards and envelopes. The 600DW series comes equipped with a molleton dampener as standard equipment.

MAX SHEET SIZE	310 x 432	mm	12.04 x 17.01	in
MIN SHEET SIZE	90 x 140	mm	3.54 x 5.51	in
PAPER THICKNESS	0.04 - 0.3	mm	0.0015 - 0.012	in
MAX IMAGE AREA	297 x 420	mm	11.69 x 16.54	in
SPEED RANGE(.I.P.H)	3,000 - 9,000	.I.P.H	3,000 - 9,000	.I.P.H
PRESS DIMENSIONS ( W x L x H )	870 x 1,820 x 1,195 (600DW)	mm	34.25 x 71.65 x 47.05 (600DW)	in
PRESS DIMENSIONS ( W x L x H )	870 x 1,820 x 1,215 (665DW)	mm	34.25 x 71.65 x 47.83 (665DW)	in
PRESS WEIGHT(APPOROX.)	460(600DW)	kg	1,014(600DW)	LBS
PRESS WEIGHT(APPOROX.)	550(665DW)	kg	1,212(665DW)	LBS

EV-Master

The EV-Master is a specialized press for envelope printing, meeting the following requirements:
"Color change" "Improvement of productivity"
"Automation (operation not dependent on high skills)"
Colors can be changed quickly on the EV-Master, so it is suitable for envelope printing that involves frequent changing of colors and spot color jobs.
A Four-color and two-color model supporting full-color printing with an ink controller console can be selected as well. .

MAX SHEET SIZE	290 x 435	mm	11.42 x 17.13	in
MIN SHEET SIZE	88 x 140	mm	3.46 x 5.51	in
PAPER THICKNESS	0.08 - 0.4	mm	0.0032 - 0.0157	in
MAX IMAGE AREA	290 x 426	mm	11.42 x 16.77	in
SPEED RANGE(.I.P.H)	3,000 - 10,000	.I.P.H	3,000 - 10,000	.I.P.H
PRESS DIMENSIONS ( W x L x H )	2,425 x 4,285 x 1,530 (EV-Master4)	mm	95.48 x 168.70 x 60.24	in
PRESS DIMENSIONS ( W x L x H )	2,425 x 2,905 x 1,420 (EV-Master2)	mm	95.48 x 114.37 x 55.91	in
PRESS WEIGHT(APPOROX.)	3,500(EV-Master4)	kg	7,716	LBS
PRESS WEIGHT(APPOROX.)	1,500(EV-Master2)	kg	3,307	LBS

NP-Master

The NP-Master is an innovative machine used for numbering and perforation, which gives added value to printing quickly and easily. By adding an accessory, micro-perforation becomes possible. The optional twin perforating devices can perform T-shaped, L-shaped, or cross perforation.

MAX SHEET SIZE	470 x 365	mm	18.50 x 14.37	in
MIN SHEET SIZE	140 x 90	mm	5.51 x 3.54	in
PAPER THICKNESS	0.04 - 0.4	mm	0.0015 - 0.0157	in
SPEED RANGE(.I.P.H)	3,000 - 9,000	.I.P.H	3,000 - 9,000	.I.P.H
PRESS DIMENSIONS ( W x L x H )	1,030 x 2,089 x 1,189	mm	40.55 x 82.24 x 46.81	in
PRESS WEIGHT(APPOROX.)	500	kg	1,146	LBS

RP-M II

Punch holes that are essential for position register are made by magnifying the register mark on the press plate 40 times with both CCD cameras. Since punch holes can be made at accurate positions, register work on the press can be reduced significantly, which contributes to improvement of productivity.

REGISTER MARK MANGNIFICATION	45times		45times
PLATE SIZE(WIDTH)	310 x 310 - 745 x 605	mm	12.20 x 12.20 - 29.33 x 23.82	in
LEFT,RIGHT MEASURE RANGE OF CCD	180 - 740	mm	7.09 - 29.13	in
UP,DOWN MEASURE RANGE OF CCD	80 - 310	mm	3.15 - 12.20	in
STANDARD PUNCH HOLE PITCH	220/425	mm	8.66/16.73	in
MACHINE DIMENSIONS ( W x L x H )	520 x 1,040 x 1,000	mm	20.47 x 40.94 x 39.37	in
WEIGHT(APPOROX.)	85	kg	187	LBS

UV-Master

The UV varnish coating provides added value to each printed sheet. It can be applied for surface protection, surface gloss, and also DM using pressure varnish coating. Despite its small size, SAC-18, a UV varnish coater with a full-scale chamber system, offers new possibilities to printing by post-processing.

MAX SHEET SIZE	470 x 365	mm	18.50 x 14.37	in
MIN SHEET SIZE	257 x 182	mm	10.12 x 7.17	in
PAPER THICKNESS	0.1 - 0.3	mm	0.0039 - 0.012	in
MAX IMAGE AREA	454 x 345	mm	17.87 x 13.58	in
SPEED RANGE(.I.P.H)	3,000 - 6,000	.I.P.H	3,000 - 6,000	.I.P.H
PRESS DIMENSIONS ( W x L x H )	1,056 x 2,835 x 1,073	mm	41.57 x 111.6 x 42.24	in
PRESS WEIGHT(APPOROX.)	900	kg	1,984	LBS